Your Position:Home > Product> Generator Controller

Minco 830/840 LCD Multifunction Genset Intelligent controller

Update:2014/5/22      View:
  • Number:165829-342

Minco 8130/840 genset controller adopts special mould, high strength ABS panel, PMMA transparent window and metal back shell. The inside of the controller uses high performance microprocessor, large screen backlight character LCD display, Chinese and English menu. The controller has auto start, auto protection, four remote control and auto transfer switch control function. It provides multi-function,clear display,easy operation and good appearance features.

Minco 830 is a full-function stand-alone generator set controller, which can set and control the generating set independently, and also adapts to various models and powers generating set.
Based on 830, Minco 840 is increased mains three phase monitoring (voltage, frequency), built-in auto start ATS function.

I. Functional Characteristics
1. Dual processing chip, real virtual value measurement, agile reaction
2. Large screen backlight character LCD display
3. Chinese and English menu, interactive operation. Can be set and operated without computer.
4. Auto start, auto protection, ATS control, mains monitoring(840);
5. Perfect auto protection, direct character display alarm details and working state, more than 50 fault records.
6. User-defined input /output port, more than 10 option for each port.
7. All the relays contact capacity is over 10A/250VAC/30VDC. It applied for electronic speed governing and mechanical speed regulation
8. Timer start /stop function, Year/month/week/day
9. RS232 communication, attached “four-remote control” monitoring software
10. Unique rubber bearing design with waterproof, dustproof and shock absorption features

II.Control parameters
1. Analog inputs (16 items):
Three-phase generator voltage, three-phase load current, coolant
temperature 1, coolant temperature 2, oil pressure 1, oil pressure 2,
oil temperature, fuel level, battery voltage, frequency, speed, monitoring input
2. Switch inputs (6 items of which 4 programmable item. 15 options for each item):
Remote start、emergency stop、user-defined input1-4 (Optional:0-monitor,1-low oil pressure;2-high coolant temperature;3-acceleration limit;4-deceleration limit;5-high oil temperature;6-low fuel level(alarm non-stop);7-high fuel level; 8-float charge fail alarm;9-alarm;10-alarm non-stop(running state);11-alarm stop ;12 monitoring; 13-remote reset; 16-31 defined function same as 0-15’s function(0-15 close effective; 16-31 off effective);
3. Relay outputs (7 items of which 4 programmable items, 18 options for each item )
Fuel、start、power、user-defined1-4 (0-common failure;1-auxiliary stop;2-genset supply;3-automation;4-closed on idle;5-off on idle;6- pre-fuel;7-warm up;8-acceleration;9-deceleration;10-over speed; 11-over load; 12-high speed; 13- low battery voltage; 14-Pumping ; 15- alarm; 16-over heat; 17-mains; etc. Minco 830 Back View
4. Delay setting (22 items):
Delay of cool down;delay of pre-fuel;delay of genset start;delay of idle start;delay of crank interval;delay of idle stop crank time;acceleration delay;bypass time;delay of auxiliary input 1;delay of energize to stop(ETS);delay of auxiliary input 2; delay of auxiliary input 3;overload delay;delay of auxiliary input 4;over voltage delay;delay of charge failure;delay of over frequency;delay of low battery;delay of warm up;delay of transform;deceleration delay;
5. System parameters settings (17 items):
Trip frequency;output setting(4 items);start method;current ratio; display mode;password setting;input setting(4 items);language choose;address; back light choose; speed measuring method; gear tooth No; voltage measuring method; mains failure start method..
. External Features
1.Dimension: Front panel : (W×H×D) 213×153 x8mm
2.Back panel: (W×H×D) 197×137×52 mm
3.Mounting hole:(W×H) 198×138 mm
4.Net weight: 850 g
5.Power Supply : DC8-36 V,power consumption current <300 mA
6.Working environment: -25~70℃, relative humidity <95%

More Products